How do I transfer the sticker from the backing paper to the transfer film?
https://www.facebook.com/PawSticker/videos/283064249155494/
Applying our stickers
You will need:
Cleaning agent
A clean cloth
Degreaser
Painter's masking tape
A tape measure
Knife or scissors
A squeegee or similar
A water spray bottle with detergent.
Transfer paper = translucent
Backing paper = checkered back
The edge of the transfer paper is folded over for protection
and connected to the carrier material
Cut out the motif generously
Turn the motif onto the translucent side (transfer paper)
Use a squeegee to spread it from the inside out.
This is how you attach the material to the transfer paper
Attach the motif to the transfer paper on the left and right with
painter's masking tape.
Use the tape measure to determine the exact position.
Is the motif positioned in the right place?
Stick masking tape over the entire top edge of the sticker.
Remove the masking tape on one side and fold the sticker over to the
other side, which is still attached with masking tape.
Remove the backing paper until just before the masking tape
Now use a squeegee to spread it onto the sticker from the middle.
Remove the remaining masking tape.
Fold the other side over and remove the rest of the
backing paper
Now attach the other side of the sticker in the same way.
Peel off the transfer paper.
Any air bubbles can be pierced with a needle and
smoothed out.
Paw-Sticker.de wishes you lots of fun with our products
New in the shop system:
You can match your animal portrait to the colored background. You can choose between
- Version 1, normal motif: dark foil, light background
or
- Version 2, outlines for light foil and dark background
Vs. 1 "Normal" for dark foils Vs. 2 Outline for light foils
All sizes are in cm!
The copyright of the stickers shown here lies expressly with www.NaehEcke.com!
| |
Vs. 1 "Normal" for dark foils | Vs. 2 Outline for light foils |
| |
All sizes are in cm!
The copyright of the stickers shown here is expressly held by www.NaehEcke.com!