Cast-molded PVC film
For high quality advertising on vehicles and transport
High dimensional stability even when glued over beads and rivets
Approved by ABG in the field of STVZO
hardly inflammable according to DIN EN 13501-1
Material thickness: 60μ
Oracal 751C High Performance Cast - Labeling film with the best processing properties
The Oracal 751C film series by Orafol impresses with its large color spectrum with 116 glossy colors, which are complemented by matt black and matt white. It is a cast high-performance film designed for long-term outdoor applications. With the Oracal 751C plotter foils you can effortlessly realize sophisticated vehicle and transport advertising. The film can be printed with different printing methods. All Oracal 751C adhesive films have excellent dimensional stability and excellent adhesion in beads and over rivets. With an Oracal 751C adhesive film you can easily refine both flat and curved surfaces.
Technical characteristics of the Oracal 751C film series
With a material thickness of only 0.06 mm, the color foils of the series have a very good flatness and best fitting behavior on straight and curved surfaces. A silicone-coated backing paper allows processing on all common cutting plotters and facilitates de-latticing even of the smallest fonts and designs. After bonding, the Oracal 751C PVC film has a shrinkage of only a maximum of 0.15 mm in the longitudinal direction. Depending on the color chosen, the label foil achieves a maximum shelf life of between 3 and 8 years when used outdoors. When used inside the film, durability is almost unlimited. Oracal 751C labeling films are flame retardant according to DIN EN 13501-1 and resistant to oils, greases and weak salts, alkalis and acids. A temperature resistance is given in the range of -50 ° C to + 120 ° C. The high-performance adhesive films are also largely resistant to seawater.
Instructions for processing Oracal 751C color films
The ambient temperature should not be less than + 8 ° C when bonding Oracal 751C High Performance Cast foils. Temperatures in the range of + 18 ° C and + 22 ° C are optimal. After bonding, greater temperature fluctuations should be avoided for a period of about 72 hours. For Oracal 751C films you can choose between wet and dry bonding. For transfer to the surface to be pasted, which must be free of dust, grease and dirt, papers and film tapes are suitable with medium to high bond strength. Be sure to use a suitable transfer paper for wet bonding. Oracal 751C films can be stored for about 2 years. After that, the optimal adhesion of the adhesive can no longer be guaranteed.
ORACAL 638 Wall Art is a very flexible soft PVC film with a matte finish. The film is ideal for wall tattoos, wall decorations, lettering and markings indoors, especially on interior walls. In addition, the film is flame retardant.
ORACAL 638 Wall Art The film is perfectly suitable for mounting on flat surfaces and the removable polyacrylate adhesive allows it to be removed from most surfaces without residue. Before bonding, the substrate must be free of dust, grease and dirt. After bonding, the wall foil is temperature-resistant from -40 ° C to + 80 ° C, in which no significant changes can be expected. The durability of the film indoors is up to 2 years.
The high-quality special adhesives of the ORACAL® and ORAJET® self-adhesive materials form a very good bond
almost all clean surfaces (wallpaper).
Unsuitable substrates are e.g.
• coarse textured substrates,
• concrete, plasterboard walls, plaster,
• surfaces with dust-repellent surface,
• damp-proof walls (eg bathroom, garage) or even damp walls,
• soiled wall surfaces (e.g., nicotine, fat),
• poorly adhering surfaces (e.g., old wallpaper).
It is important to clean the surface just before gluing, as dust and other suspended particles are extreme
can settle quickly on the surface. For cleaning we recommend a dry and lint-free microfibre cloth.
Particular attention should be paid to the areas in which the corners and edges of the graphics are located.
Basically, the films are to be glued dry. For more information, please refer to the above
Very conformable soft PVC film. Available in over 50 colors with a matt surface.
One side coated silicone cardboard, 135 g / m². For white film, a light blue coated silicone cardboard is used to
to achieve a stronger contrast to the subject.
Polyacrylate, easily removable
scope of application
For markings, lettering and decorations on wallpaper indoors. Very suitable for processing
on cutting plotter systems. For the application we recommend as transfer tape ORATAPE® LT 95.
Thickness * (without protective paper and adhesive) 0.080 mm
Dimensional stability (FINAT ™ 14) glued on steel, no measurable shrinkage in transverse direction,
in running direction max. 0.4 mm
Temperature resistance *** Bonded to aluminum, -40 ° C to + 80 ° C, none
Fire behavior (DIN EN 13501-1) B-s2, d0 (hardly inflammable, limited smoke generation,
Adhesive strength * (FINAT TM 1, after 24h, stainless steel) 6 N / 25 mm
Tear resistance (DIN EN ISO 527) Longitudinal:> 19 MPa
Cross:> 19 MPa
Elongation at break (DIN EN ISO 527) Longitudinal:> 130%
Shelf life ** 2 years
Bonding temperature> + 10 ° C
Durability with proper processing
Removability Can be removed residue-free from most surfaces
* Average value ** in original packaging, at 20 ° C and 50% rel. humidity
The surface to be glued must be free of dust, grease or other contaminants that increase the bond strength of the surface
Material can affect. In order to determine whether the type of subsoil provides a sufficient primer, are
perform application tests before the application. Furthermore, those issued by ORAFOL
To observe processing instructions. The traceability of our goods according to ISO 9001 is based on the roll number
All ORACAL® products undergo thorough quality control throughout the manufacturing process. It will
warrants that the products will be delivered in commercial quality and free from manufacturing defects. The ones to the ORACAL®
Published information is based on research that the company deems reliable, but none
Guarantee. Due to the diverse application possibilities of ORACAL® products and the continuous development of new ones
Applications are the responsibility of the purchaser, the suitability and performance of the product for each intended use
to consider. The buyer bears all risks arising from the use of these products. All information is subject to change
any changes. ORACAL® is a registered trademark of ORAFOL Europe GmbH.